The I.Am Coffin Tip does not have a defined contact area which means that nail technician has flexibility of placement of the tip on the nail plate. This creates an easy application on the natural nail and needs minimal blending to the nail plate. The I.Am Coffin Tips are produced with an ABS plastic which creates a durable tip with tapered and reinforced extension. The c-curve and the lower sidelines are little more dramatic. These tips are perfect for shaping into almond shapes too due to their dramatic c-curve and tapering.
Features & benefits
- Deep c-curve
- Flexible contact area
- Easy application
- Fast blending
- 100 pcs per box
1.First choose the right tip and tip size. Pay attention to the natural C-Curve, the exact fit to the lateral sidewalls and the contact area for optimal adhesion. Hold the tip between your thumb and your index finger at the end of the tip and moisten the contact area inside with I.Am Brush On Resin. Turn the tip between your thumb and your index finger.
2.Push the edge of the contact area in a 45 degree angle up to the sides of the free edge of the natural nail then lay the tip lightly down on the nail plate. If you cannot see any bubbles press the tip for 5 seconds against the natural nail plate and keep the tip in the correct position. Don’t lift the tip up! Use an I.Am 180 or 240 grit file to blend the tip to the natural nail plate. Make sure that your cannot see any transition or step between the natural nail and the contact area. Remove any shine of the tip.